El enlace fue enviado a su email.

No se pudo enviar el enlace a su email. Por favor, verificar su correo electrónico.

Ayuda en línea

GEO5

Tree
Settings
Producto:
Programa:
Idioma:

Reinforcements

In the "Reinforcement" frame, parameters of reinforcement are specified.

Input mode

  • 1 reinforcement type - the wall is reinforced by one type of reinforcement. The type of reinforcement is selected in the combo list. The reinforcements are generated from the bottom row of blocks to the row, which is selected in the combo list.
  • 2 reinforcement type - the wall is reinforced by two types of geo-reinforcement. There is different reinforcement in the upper and bottom part of wall. The input is same as in the case of one type of reinforcement.
  • table of reinforcements - the reinforcements are specified for each row of blocks

Reinf. installation

  • in every row of blocks (50%) - the reinforcements are placed in every block

  • in every other row of blocks (25%) - the reinforcements are placed in every other block

Top reinforcement

  • straight (25%) - the reinforcements in upper row are placed in every other block

  • anchored tail - upper part of reinforcements in upper row of blocks is directed in the angle to its bottom

Reinforcement geometry

  • identical length of reinforcements - all reinforcements have same length l
  • identical ending of reinforcements - all reinforcements end in the same distance from the wall lk

If the soil between the reinforcements is different than soil assigned to geological profile, then program allows to specify this soil by checking the option "Input different reinforced soil". Subsequently, in combo list user selects the type of soil (the combo list contains soils introduced in the frame "Soils").

The "Types of reinforcements" frame is available just in the case of MSE Wall calculation. The type of structure is selected in the frame "Settings".

Frame "Reinforcement"