12/02/2020
ICC Colombia, nuestro distribuidor en Colombia, participará de la conferencia geotécnica "VI Conferencia Regional De Geotécnia” en la Universidad de Ibagué del 12 al 14 de Febrero del 2020.
17/11/2019
Fine participará del XVI Conferencia Panamericana de Mecánica de suelo e Ingeniería geotécnica en Cancún desde el 17 al 20 de Noviembre del 2019.
No dejes de pasar por nuestro stand para saber mucho más sobre GEO5 y sus ventajas.
07/11/2019
ICC Colombia, nuestro distribuidor en Colombia, participará de la "Jornadas: XXI Estructurales y XVIII Geotécnicas" en Bucaramanga del 7 al 9 de Noviembre del 2019. Visite el stand N°5 para saber más sobre las ventajas del software GEO5.
17/10/2019
CAD Solucoes, nuestro distrobuidor en Brazil, participará de la conferencia geotécnica "XII Simpósio de Prática de Engenharia Geotécnica da Região Sul" en Joinville, Santa Catarina desde el 17 al 19 de Octubre 2019.
28/08/2019
El Ingeniero Ignacio Zuloaga (geotecnia.ONLINE) distribuidor de GEO5 participará del congreso geotécnico "XIV Congreso de Ingeniería Civil" en la ciudad de Panama del 28 al 31 de Agosto 2019.
25/06/2019
Oitec Ltda., distribuidor de GEO5 en Chile, participará del congreso “Latin America Earthquake Impact Mitigation Summit” en Santiago el próximo 25 y 26 de Junio 2019.
04/06/2019
AD Softwares Tecnicos, nuestro distribuidor en Brasil, participará del 9° Seminario en cimentaciones especiales e ingeniería geotécnica SEFE 9. Este evento tendrá lugar del 4 al 6 de Junio 2019 en San Pablo. Los invitamos a visitar el stand de GEO5 n33.
03/04/2019
Oitec Ltda., nuestros distribuidor en Chile, participará del XII Congreso Chileno de Sismología e Ingeniería Sísmica, del 03 al 05 de Abril del 2019 en el Campus Isla Teja de la Universidad Austral de Chile, en la ciudad de Valdivia.
28/03/2019
ICC Colombia tendrá un stand en el predio del Curso de Diseño de Ciementaciones utilizando el método LRFD en Bogotá (28-30 March 2019), donde presentará todo sobre GEO5.
03/12/2018
Oitec Ltda., Nuestro distribuidor en Chile, presentará GEO5 en el “X Congreso Chileno de Ingeniería Geotécnica” en Valparaiso, Chile del 3 al 5 de Diciembre.
No te pierdas de este congreso y de aprender mucho más de esta poderosa herramienta para resolver problemas geotécnicos.
21/11/2018
Fine participará de la XXIX Reunión Nacional de Ingeniería Geotécnica (XXIX Reunión Nacional de Ingeniería Geotécnica) en León, Guanajuato del 21 al 24 de Noviembre.
07/11/2018
Nuestro distribuidor ICC Colombia participará del XVI Congreso Colombiano de Geotécnia donde presentará GEO5 y todas sus ventajas
Lugar: Paipa, Colombia
Fecha: del 7 al 10 de Noviembre 2018
No dejes de acercarte al stand N°6 para conocer más sobre la suite de programas para resolver problemas geotécnicos.
08/10/2018
Gintegro, Nuestro distribuidor en USA realizó una capacitación de GEO5 de tres días en el Ministerio de Transporte de San Vicente y Granadinas.
24/08/2018
ICC chile llevará adelante una capacitación de 20 horas sobre las herramientas y conocimientos necesarios para modelar, diseñar, analizar y sacar reportes de todo tipo de fundaciones, profundas y superficiales, de forma computacional con GEO5
Fecha curso: 24,25,26 Agosto del 2018
Modalidad: Presencial
Lugar: Santiago. Hotel DoubleTree.
30/07/2018
ICC Colombia distribuidor de GEO5, llevará a cabo un curso 100% online con clases en vivo donde los participantes aprenderán a estimar parámetros, conceptos y metodologías de diseño para fundaciones/cimentaciones superficiales y profundas utilizando GEO5.
Fecha de inicio: 30 de Julio
Duración: 4 semanas
22/06/2018
Nuestro distribuidor ICC Chile presenta "Curso Cimentaciones Intensivo".
Curso presencial de 20 horas para modelar, diseñar, analizar y sacar reportes de todo tipo de fundaciones, profundas y superficiales, con GEO5.
Fecha: Junio 22,23 y 24
Lugar: Santiago - Chile
Más info e inscripción en : icc-virtual.com
26/05/2018
La quinta Reunión de Distribuidores Fine tuvo lugar del 17 al 18 de mayo de 2018 en Praga. Más de 30 participantes de 25 empresas de todo el mundo se reunieron en el Hotel Pyramida durante dos intensos días de trabajo.
La reunión abarco charlas de ingenieros geotécnicos especializados y desarrolladores de la empresa Fine.
La misma fue todo un éxito no solo porque reunió a todos los distribuidores, sino también por la oportunidad de compartir experiencias mostrando el creciente potencial del software GEO5.
24/05/2018
Nuestro distribuidor ICC llevará a cabo un seminario sobre CIMENTACIONES PROFUNDAS Y SUPERFICIALES con GEO5
Inscribite en la primer clase GRATIS el Jueves 24 de mayo, 7pm Colombia
23/04/2018
ICC colombia llevará adelante un curso donde proporcionarán las herramientas y conocimientos necesarios para modelar, diseñar, analizar y estudiar la estabilidad de macizos rocosos en obras civiles y mineras a distintas escalas de análisis de la mano de GEO5
Fecha Inicio: 23 Abril del 2018
Modalidad: 100% online con clases en vivo
Duración: 4 semanas
12/04/2018
ICC Colombia, nuestro distribuidor en Colombia, participará en Bogotá de las "Jornadas Geotécnicas y Estructurales" el 12 y 13 de Abril del 2018. No dejes de pasar por el stand y conocer más sobre GEO5.
20/03/2018
12/03/2018
Nuestro distribuidor Colombiano, ICC Colombia presentará un curso de 4 semanas donde los participantes aprenderán a estimar parámetros, conceptos y metodologías de diseño para fundaciones/cimentaciones superficiales y profundas utilizando GEO5.
Fecha curso: inicia 12 de Marzo 2018
29/01/2018
No te pierdas este curso de 4 semanas que nuestro distribuidor de ICC Chile dictará, sobre el diseño de cimentaciones superficiales y profundas con GEO5.
Fecha de inicio: 29 de Enero 2018
Modalidad: Online
Más info en: http://icc-virtual.com
20/01/2018
Nuestro distribuidor ICC Colimbia llevará a cabo un Seminario Online GRATUITO donde aprenderás todo sobre Cimentaciones superficiales y profundas de la mano de GEO5.
Fecha: Enero 20
Hora: 9 am (Colombia)
Modalidad: Webinar
Más información y otros cursos aquí
10/11/2017
Nuestro distribuidor Geotecnia.ONLINE, llevará a cabo una presentación en vivo sobre el Software Geotécnico GEO5 - Diseño muro de contención anclado y no anclado, Presentaremos la resolución de un Muro de Gravedad y el Diseño de un Muro en Voladizo.
Vea aqui más información sobre este webinar: GEO5 - Diseño de muro anclado/no anclado
27/10/2017
Geotecnia.ONLINE, nuestro distribuidor, llevará a cabo una presentación en vivo sobre GEO5, El tema principal será soluciones basadas en Métodos de Elementos Finitos utilizando el programa MEF.
Viernes, 27 de octubre entre 16:00 y 17:00 UTC-05
más información aquí
20/10/2017
El distribuidor Colombiano de GEO5 ICC Colombia dictará un curso presencial donde aprenderá las herramientas y conocimientos necesarios para modelar, diseñar, analizar y sacar reportes de todo tipo de cimentaciones profundas y superficiales, con los programas de geotecnia GEO5.
Fecha: Octubre 20,21,22. Bogotá
20/10/2017
Nuestro distribuidor ICC Chile, dictará un Curso teórico-práctico de 20 horas sobre el Diseño y Análisis de muros de Contención y de Gaviones. Reforzando aspectos teóricos y prácticos de manera computacional mediante el Software GEO5.
Fecha: Octubre 20, 21 y 22.
Lugar: Santiago. Hotel DoubleTree
19/10/2017
Nuestro distribuidor en Venezuela, distará un curso Online "Estabilidad de Taludes y Diseño Sismorresistente de Muros y Pantallas" Inicia: 19 Octubre 2017 / Duración: 6 semanas.
Vea más detalles sobre este curos en el folleto Informativo.
10/10/2017
Nuestro distribuidor ICC Colombia dictará un Seminario Online GRATUITO : Introducción al diseño y análisis de Cimentaciones Profundas y Superficiales con GEO5. Docente: Daniel Alberto Moreno Ingeniero Civil / Magíster en Geotecnia.
Fecha:10 de Octubre 2017
02/10/2017
El distribuidor de GEO5 Sismica Adiestramiento dará una charla de Capacitación Online GRATUITA sobre el Diseño de elementos de contención lateral con influencia sísmica utilizando el software GEO5.
Fecha: 2 de octubre del 2017
19/09/2017
El próximo 19 de Septiembre a las 19:30 horas (España), el ingeniero Edinson Guanchez presentará los requisitos para diseñar las cimentaciones con acciones sísmcas con el programa de cálculo GEO5.
Más información sobre este training aquí: Diseño Sismorresistente de Cimentaciones
18/09/2017
No te pierdas la charla Gratuita que Sismica Adiestramiento tiene preparada para vos el día 18/09/2017 sobre Análisis de Estabilidad de Taludes con influencia sísmica, utilizando el software GEO5.
04/09/2017
Fine participara del "Seminario Carreteras de Montaña" en San José, Costa Rica el próximo 4 y 5 de Septiembre del 2017.
31/08/2017
ICC Colombia dictará en Quito, Ecuador un curso de 20hrs. sobre Cimentaciones Profundas y Superficiales, para aprender a diseñar, analizar y sacar reportes de todo tipo de cimentaciones profundas y superficiales, de forma computacional con los programas de geotecnia GEO5.
Fecha: del 31/08/2017 al 2/09/2017
14/08/2017
Clases Online - Plataforma Webinar Dictado por nuestro distribuidor Sismica Adiestramiento, sobre Diseño geotécnico y estructural de cimentaciones profundas.
No te pierdas de esta capacitación de 6 semanas enfocada en impartir los conceptos y procedimientos principales de diseño geotécnico y estructural de pilas y pilotes sometidos a acciones gravitacionales, sísmicas y de viento.
10/08/2017
Nuestro distribuidor en Venezuela "Sísmica Adiestramiento", llevará a cabo un nuevo seminario online Diseño Geotécnico y Estructural de un Grupo de Pilotes el día 10 de Agosto del 2017 a las 17:00 hrs.
27/07/2017
El Profesor Edinson Guanchez responsable de Sísmica Adiestramiento, dealer de GEO5 en Venezuela, organiza un nuevo seminario online Diseño Geotécnico y Estructural de Pilotes sometidos a cargas laterales el día 27 de Julio del 2017 a las 17:00
27/07/2017
ICC Colombia llevará a cabo una capacitación sobre diseño de cimentaciones profundas y superficiales en
Lugar: Quito, Ecuador
Fecha: 27 y 28 de Julio 2017
09/06/2017
Seminario de Cimentaciones Profundas y Superficiales con GEO5 a cargo de nuestro distribuidor en ICC Colombia.
Lugar: Bucaramanga, Colombia
Fecha: 9,10 y 11 de Junio, 2017
26/05/2017
ICC Chile dictará una capacitación sobre diseño de cimentaciones profundas y superficiales en Santiago, Chile el proximo 26, 27 y 28 de Mayo 2017.
30/03/2017
G2 Ingeniería, nuestro distribuidor en Mexico, prensentará a GEO5 en la 5ta Jornada técnica internacional de pavimentos.
En Querétaro, Mexico del 30 al 31 de Marzo del 2017.
16/03/2017
G2 Ingeniería, nuestro distribuidor en Mexico, organiza un seminario de un día sobre Diseño de Estabilidad de Taludes utilizando los programas GEO5.
En Tijuana, Baja California, México el 16 de Marzo del 2017
12/03/2017
La empresa Fine junto con Gintegro, nuestro distribuidor en Estados Unidos, participarán de la conferencia
Geotechnical Frontiers 2017 No deje de visitarnos en nuestro stand N° 803.
En Orlando, Florida, del 12 al 15 de Marzo del 2017.
11/03/2017
CEIM-PERU, nuestro distribuidor en Perú, dictará la especialización de Ingeniería geotécnica con aplicación del software GEO5.
En Cusco, Peru el 11 de Marzo del 2017. Duración 4 meses.
16/12/2016
Nuestro distribuidor ICC Chile le proporcionará las herramientas y conocimientos necesarios para modelar, diseñar, analizar y estudiar la estabilidad de macizos rocosos en obras civiles y mineras a distintas escalas de análisis mediante los programas GEO5.
En Santiago, Chile - del 16 al 18 de Diciembre del 2016.
Puede encontrar más información en: http://www.iccchile.cl/
05/12/2016
Fine y Oitec Ltda., nuestro distribuidor local en Chile, participarán del “IX Congreso Chilenos de Ingeniería Geotécnica” en Valdivia, Chile (5 - 7 Diciembre del 2016). No te pierdas las charlas y conferencias sobre GEO5 y nos dejes de pasar por nuestro stand para saber más sobre nuestros software de ingeniería geotécnica.
24/11/2016
Nuestros distribuidor en Vietnam, Vietnam Investment Consulting and Construction Designing JSC, participará en la conferencia “GEOTEC HANOI 2016” , donde presentará el software GEO5 en el idioma vietnamita.La conferencia se llevará acabo en el Hotel Marriott en Hanoi el 24 y 25 de Noviembre del presente año.
23/11/2016
No te pierdas la XXVIII Reunión Nacional de Ingeniería Geotécnica, a realizarse en Mérida, Yucatán del 23 al 26 de Noviembre del 2016, donde GEO5 presentará todos sus productos para que conozcas todas las ventajas y bondades de nuestro conjunto de software geotecnico. Te esperamos en el stand 33 con demostraciones, y los mejores expertos en geotecnia para responder a todas tus consultas.
19/11/2016
Nuestro distribuidor ICC Colombia presentará las herramientas y conocimientos necesarios para modelar, diseñar, analizar y sacar reportes de todo tipo de cimentaciones, profundas y superficiales, de forma computacional con los programas GEO5.
En Quito, Ecuador - del 19 al 20 de Noviembre del 2016.
Puede encontrar más información en: www.icc-colombia.com.co
14/11/2016
Fine será el patrocinador principal de la “44rd Conference Foundations Brno 2016”, organizada por la Sociedad Geotécnica Checa (14-15 de Noviembre del 2016). Fine presentará la nueva edición del software geotécnico GEO5 y dará a conocer los resultados de la 10ª edición de la Competencia de Estudiantes, que organiza conjuntamente con la empresa Mott MacDonald.
14/10/2016
Estás preparado para la nueva capacitación en cimentaciones profundas y superficiales que ICC Chile tiene pensado para vos, Del 14 al 16 de Octubre, no te pierdas de esta capacitación teórica y práctica de la mano de GEO5.
Visite su página web para más detalles e información sobre éste evento
05/10/2016
ICC Colombia, nuestro distribuidor en Colombia, participará junto a GEO5 del "XV Congreso Colombiano de Geotecnia” en Cartagena (Octubre 05-07). Pase a visitiar el stand y a conocer más sobre el software GEO5.
07/09/2016
Fine y Proexrom SRL, nuestro distribuidor en Romania, serán parte de la conferencia "XIII National Conference of Geotechnical Engineering" presentando la nueva edicion de GEO5 2016. Dicha conferencia tendrá lugar del 7 al 10 de Septiembre en Cluj-Napoca organizada por la Sociedad Rumana de geotecnia y fundaciones (SRGF) y auspiciada por la Universidad Técnica de Cluj Napoca.
19/08/2016
ICC Colombia brindará una nueva capacitación en modelos aplicados a la geotecnia mediante el paquete de softwares GEO5, utilizando herramientas numéricas para el modelado de problemas físicos con orientación práctica, complementada con consideraciones reglamentarias y el análisis crítico de la tendencia de las nuevas tecnologías. No dejes de participar de este curso de 20hrs. en la ciudad de Bogotá - Colombia.
06/07/2016
Nuestro distribuidor en Francia Itech, exhibirá GEO5 en la conferencia "Journees Nationales de Geotechnique et de Geologie de L´Ingenieur" en Nancy- Francia del 6 al 8 de Julio del 2016. Únete a Itech para encontrar más información y conocer todo sobre la última edición de nuestro software GEO5
14/06/2016
De la mano de Itech, nuestro distribuidor en Francia, la última edición de nuestro software de ingeniería geotécnica GEO5 será presentada en el congreso Interoute en Paris - Francia (June 14 - 16, 2016).
08/06/2016
GEO5 será parte del “67. Berg- und Hüttenmännische Tag” congreso organizado por TU Bergakademie Freiberg - Alemania del 8 al 10 de Junio del 2016
27/05/2016
ICC Chile llevo a cabo una importante capacitación sobre Cimentaciones Superficiales y Profundas, de la mano de GEO5 en Santiago de Chile del 27al 29 de Mayo del presente año. Visite su página web para más detalles e información sobre éste evento
26/05/2016
Geogrup, nuestros distribuidor local en Turquía, participará del evento “Road 2 Tunnel Fair” en Ankara (del 26 al 28 de Mayo del 2016).
29/04/2016
Del 29 de Abril al 1 de Mayo, en Bogotá-Colombia, ICC Colombia, distribuidor de GEO5, llevó a cabo una capacitación sobre cimentaciones superficiales y profundas, donde proporcionó las herramientas y conocimientos necesarios para modelar, diseñar, analizar y sacar reportes de todo tipo de cimentaciones, profundas y superficiales, de forma computacional con los programas GEO5.
15/11/2015
La Sociedad Argentina de Ingeniería Geotécnica (SAIG) tiene el agrado de anunciar que se desarrollará la 15º Conferencia Panamericana de Mecánica de Suelos e Ingeniería Geotécnica (XV PCSMGE);en Buenos Aires (Argentina) del 15 al 18 de Noviembre de 2015.
Este encuentro reunirá a expertos internacionales, investigadores, académicos, profesionales y empresas de geoingeniería en una oportunidad única para intercambiar ideas y discutir buenas prácticas en las áreas de mecánica de suelos y rocas.
Fine estará presentando su producto estrella - GEO5 Software para ingeniería geotécnica – en el stand número 1, los esperamos!
12/05/2015
Incotec y Fine agradecen su participación en el 2do. Congreso internacional de cimentaciones profundas y aspectos de la construcción de fundaciones y el interés de la audiencia en nuestro Software GEO5. Este evento tuvo lugar en la ciudad de Santa Cruz, Bolivia del 12 al 15 Mayo 2015, donde Fine ingresó al mercado boliviano con la participación de nuestro Gerente General Jiri Laurin, quien presentó las ventajas competitivas del software GEO5.
17/04/2015
Orgullosos de haber formado parte del III Congreso Internacional de geotécnia y cimentaciones, Nuestro representante Peruano IngeServicios presentó con gran éxito el software GEO5. El 18 de Abril del 2015 en Lima- Peru, Junto a numerosos disertantes se expusieron investigaciones, avances y proyectos a profesionales, empresas, y entes educativos creando un espacio propicio para aprender como resolver todo tipo de problemas geotécnicos utilizando GEO5. Gracias IngeServicios por introducir GEO5 a toda la comunidad geotécnica peruana.
17/04/2015
Nuestro distribuidor, Ingeservicios S.A.C., presentará a GEO5 en su país Peru, en la "3er Conferencia Internacional de Geotecnia y Cimentaciones" el cual se llevará a cabo en la ciudad de Lima el 17 y 18 de Abril. Para conocer todo sobre GEO5 los esperamos en el stand nro.2!
26/11/2014
Mas eventos en Latino America - Más GEO5 en Español Felices de formar partede la comunidad geotécnica Chilena, Fine juntos a nuestro dealer Chileno, Oitec Ltda., presentó GEO5 en el “VIII Chilean Congress in Geotechnical Engineering”. Tal evento tuvo lugar en Santiago de Chile, del 26 al 28 de Noviembre del 2014.
26/11/2014
Nuestro distribuidor en Chile, OITEC LTDA. participará del “VIII Congreso Chileno de Ingeniería Geotécnica” presentando el conjunto de software para geotécnia GEO5, a llevarse a cabo en la Capital Chilena - Santiago de Chile.
Encuentra más información y enterate de todas las ventajas de GEO5 visitando el stand de OITEC del 26 al 28 de Noviembre del 2014.
15/10/2014
Del 15 al 18 de Octubre del 2014, Fine junto a Ingeosolum Colombia han tenido el placer de formar parte del XIV CONGRESO COLOMBIANO DE GEOTECNIA, presentando a toda la comunidad nuestro software para resolver problemas geotécnicos GEO5. En un stand que reunió al ámbito educativo y privado profesional, GEO5 presento sus ventajas y soluciones para la ing. civil y geotécnica. Agradecidos de formar parte de esta experiencia los esperamos en el próximo evento.
15/10/2014
Invitamos a la comunidad geotécnica nacional y regional a participar en el “IV Congreso Colombiano de Geotecnia & IV Conferencia Suramericana de Ingenieros Geotécnicos Jóvenes - XIVCCG & IVCSAIGJ”.
Estos eventos se llevarán a cabo del 15 al 18 de Octubre del 2014 en la Ciudad de Bogotá D.C., Colombia donde encontrarás sesiones y talleres presentados por profesores y profesionales internacionales y foros técnicos de debate sobre diferentes problemáticas relacionados a la Caracterización Geotécnica y Modelación Física y Numérica, Estabilidad de Taludes, Fundaciones, Excavaciones Subterráneas, Amenazas Geológicas y Cambio Climático.
No te pierdas la oportunidad de visitar el stand de Ingeosolum donde encontrarás toda la información de GEO5 que estabas buscando.
15/11/2013
Durante el congreso internacional de cimentaciones profundas, realizado en México, DF, Fine presentó su software para resolver problemas geotécnicos GEO5, al mercado mexicano en un stand donde el interés, el intercambio de experiencias y proyectos, generó un ambiente propicio y exitoso donde ingenieros, profesores, alumnos, empresas privadas y públicas mostraron especial interés en nuestra solución. Nos agrada poder compartir con nuestros usuarios y clientes esta experiencia, y nos mantenemos a la espera de nuestro próximo encuentro.
15/11/2013
2do Simposio Internacional de Cimentaciones Profundas 14 y 15 de noviembre de 2013 - Ciudad de México
La Sociedad Mexicana de Ingeniería Geotécnica A.C. y el Deep Foundations Institute organiza el 2do Simposio Internacional de Cimentaciones Profundas, donde Fine tendrá su lugar en el stand N°21 para crear un espacio donde se promueva el desarrollo técnico y para compartir experiencias sobre la resolución de problemas geotecnicos con el programa GEO5.
Este congreso está dirigido a ingenieros geotecnistas, constructores, gerentes de proyectos, fabricantes, proveedores, consultores, académicos, estudiantes, y a todos los interesados en el diseño y la construcción cimentaciones profundas.
Te esperamos en nuestro stand el 14 y 15 de noviembre, Ciudad de México.
31/10/2013
Del 31 de Octubre al 2 de Noviembre del 2013, GEO5 fue presentado en Boyacá donde profesores y presentadores de distintas partes del mundo abrieron el debate sobre geotecnia, ingeniería sísmica y dinámica de suelos.
De la mano de nuestro distribuidor local, Ingeosolum, GEO5 llega al mercado colombiano, como una solución asequible, amigable, y completa para resolver todo tipo de problemas geotécnicos.
21/11/2012
FINE y GEO5 fueron presentados en el congreso de Geotecnia realizado el 15 de Noviembre del 2012 en la Universidad de Federico Villarreal de la Ciudad de Lima – Perú.
Este evento fue el punto de encuentro de profesores y alumnos de diferentes universidades donde la presentación de proyectos, el debate, el intercambio experiencias tuvo lugar junto a las demostraciones, videos tutoriales y material informativo sobre GEO5, presentado por el profesor José Luis Ponce Filios quien llevo a cabo la charla “Software para geotecnia”.
16/11/2020
La nueva edición introduce la nueva herramienta “Anexos” en todos los programas, dos nuevos módulos (Estratigrafía - Movimientos de Tierra, MEF - Sismo) y muchas otras mejoras.
10/06/2020
Esta actualización presenta más de 30 mejoras en todos los programas GEO5 e introduce nuevos Manuales de Ingeniería. Más sobre la Nueva Actualización.
21/03/2020
Debido a la situación que atraviesa el mundo por la pandemia covid19, muchos de nuestros usuarios ahora tienen que trabajar desde casa. Nos gustaría colaborar en esta difícil situación y ofrecer las siguientes opciones:
Cambio de Licencia Local a Licencia de Red a mitad de precio
Usted puede cambiar de licencia local a la licencia de red por el 15% del precio del software (el precio estándar es el 30%) más la llave de red HW. La versión del programa que está utilizando seguirá siendo la misma. Si desea utilizar la última Edición 2020, primero debe comprar la actualización.
Licencia adicional a mitad de precio
Ofrecemos la segunda, y demás licencias adicionales, con un 50% de descuento sobre el precio estándar. La oferta se aplica a licencias locales y licencias de red adiicionales. Las licencias adicionales estarán en la misma versión que usted está utilizando en este momento. Si desea trabajar con la última Edición 2020, primero debe comprar la actualización.
Llave temporal por Software (local)
Si usted adquiere una licencia local con llave por hardware, la misma se puede reemplazar temporalmente por una llave por software, que se envía por correo electrónico. La llave por hardware se enviará y entregará tan pronto como la situación lo permita. Usted solo deberá abonar la llave por hardware, la llave por software se otorgará de forma gratuita.
Si usted está interesado en alguna de estas opciones, contáctenos por correo electrónico a hotline@fine-latinamerica.com.
La oferta es válida hasta nuevo aviso dependiendo de la situación actual.
01/11/2019
La Edición 2020 presenta la nueva herramienta “Notas” en todos los programas GEO5, modelado simplificado del subsuelo en 3D mediante el programa Estratigrafía y muchas otras mejoras en todos los programas GEO5.
10/05/2019
Presentamos las novedades sobre la Nueva Actualización GEO5 2019. Más información sobre la Nueva Actualización de GEO5 2019.
19/11/2018
Nos complace anunciar el lanzamiento de la nueva Edición 2019, que incluye principalmente el desarrollos del programa Estratigrafía, módulos Registros y Perfiles Geológicos, la funcionalidad BIM y la capacidad de mostrar la estructura y/o las ubicaciones del sitio en Google Maps
Ofrecemos seis paquetes de programas, a precios muy atractivos. el mantenimiento anual con descuentos, y planes de arrendamiento muy interesantes.
Vea más información sobre nuevo GEO5 2019.
19/11/2018
Lista de precios simplificada, paquetes a precios optimizados
Hemos modificado nuestra lista de precios de modo que tanto el costo de los programas individuales como los paquetes sean sencillos de adquirir. También hemos introducido seis paquetes de programas con planes muy atractivos de alquiler y mantenimiento.
Paquete Geológia
El paquete Geología consta del programa Estratigrafía y de los módulos Registros y Perfiles Geológicos. El paquete está específicamente diseñado para informes de datos de investigación de campo y generación de modelos geológicos. Los datos resultantes se pueden entregar a los diseñadores geotécnicos para trabajos adicionales de modelado del suelo y también se pueden usar como datos de entrada en otros programas GEO5.
Costo-beneficio del programa mantenimiento y de paquetes
Que nuestros clientes estén satisfecho con nuestros productos es extremadamente importante para nosotros. Nuestra intención es que nuestros clientes siempre utilicen la versión actual de nuestro software. Por esta razón, hemos creado planes de mantenimiento más rentables y beneficiosos para usted; es decir, cuando se agrega un nuevo programa a un paquete, los clientes con programa mantenimiento obtienen ese programa de forma gratuita. Vea la nueva lista de precios.
¿Necesita el software para un solo proyecto? Pruebe con nuestros Planes de Alquiler.
Si requiere del software por un proyecto en específico entonces aproveche la posibilidad de planes de arrendamiento. Si le gustó el software, puede convertirlo en una licencia perpetua a un precio muy favorable. Vea la nueva lista de precios.
07/05/2018
Esta actualización trae mejoras significativas para nuestros programas:
Aprenda más sobre esta actualización o pruebe la versión Demo.
El lanzamiento del módulo Investigación de Campo se pospuso para Noviembre 2018, con el objetivo de brindar el soporte correcto a todas las funciones solicitadas y así brindarles la máxima calidad.
Como disculpas brindaremos de forma gratuita la versión 2019 del Programa Estratigrafía a todos los usuarios de este programa.
Los inscriptos al programa Mantenimiento Fine y los usuarios de GEO5 2018 pueden descargar e instalar la actualización de forma gratuita. Los demás usuarios pueden calcular el precio de la actualización individual en la tienda online, simplemente ingrese en su cuenta.
03/11/2017
La nueva Edición lanza dos nuevos programas Estratigrafía y Zapata por CPT. Además de un gran número de importantes mejoras.
Vea un breve video sobre el programa Estratigrafía para evaluar los resultados de la investigación de campo.
Vea más información sobre la nueva Edición GEO5 2018.
Pruebe la Versión Demo.
05/05/2017
La nueva actualización trae consigo la opción de seguridad por software y una serie de mejoras y nuevas características en nuestros programas:
También presentamos el nuevo paquete de software GEO5 Muro Redi-Rock para un diseño completo de muros de contención prefabricados utilizando el sistema Redi-Rock Inc. (EE.UU.).
Sepa todo sobre la Nueva actualización y pruebe la Versión demo.
Los clientes suscritos al Programa Mantenimiento Fine y los usuarios de GEO5 2017 pueden descargar e instalar la nueva actualización de forma gratuita. Otros usuarios pueden calcular el precio de la actualización individual en nuestra Tienda online todo lo que necesita hacer es iniciar sesión en su cuenta.
04/11/2016
GEO5 presenta muchos cambios y mejoras. Simplemente pruebe nuestra versión demo de forma gratuita.
Los suscriptos al mantenimiento Fine pueden descargar e instalar la nueva edición de forma gratuita. Otros usuarios pueden calcular el precio de la actualización individual en nuestra tienda online - sólo debe ingresar a su cuenta.
Los suscriptos al Mantenimiento Fine también pueden disfrutar del descuento especial del 10% en la compra de nuevos programas o licencia adicional.
01/11/2016
Nuestros fieles clientes serán premiados con un descuento del 10% en la compra de un nuevo software o licencia! Estamos otorgando un descuento en las compras de software y licencias a todos aquellos suscriptos al mantenimiento Fine. Para obtener más información, lea los términos y condiciones.
03/05/2016
Ya está disponible la última actualización de GEO5 2016 y trae consigo las siguientes novedades:
Además, se presentan nuevos materiales de capacitación, y todo el material actualizado para la versión GEO5 2016.
Encuentre más información sobre esta actualización o simplemente descargue la versión Demo y véalo usted mismo.
Aquellos inscriptos al Programa Mantenimiento Fine y todos los usuarios de GEO5 2016 pueden descargar e instalar la última actualización de forma gratuita. Los demás usuarios pueden calcular el precio de la Actualización Individual ingresando a su cuenta en nuestra tienda online.
01/11/2015
GEO5 2016 cuenta con nuevo programa Pilote Anti-Deslizante y muchas otras mejoras importantes:
Vea más información sobre GEO5 2016 o simplemente pruebe nuestra versión Demo.
Aquellos inscriptos en el Mantenimiento Fine pueden descargar e instalar la nueva Edición de forma gratuita. Otros clientes pueden calcular el precio de su Actualización Individual en nuestra tienda - sólo tiene que registrarse en su cuenta o contactarnos.
01/11/2015
Fine Software cambia el método de liberación de las nuevas versiones, a partir del 01 de noviembre 2015.
La razón es ofrecer un mejor servicios a nuestros clientes con más rápida disponibilidad de las nuevas características del programa.
Se introducen dos nuevos términos
Edición - se libera una vez al año el 1ro de Noviembre, con la etiqueta del año de liberación detrás del nombre del software (GEO5 2016). Cada edición se compra por separado (Costo de actualización 20%). Usuarios de Fine Mantenimiento obtienen la actualización gratis.
Versión - Cada edición puede tener un número arbitrario de versiones, que se liberan durante el año. Las nuevas versiones contienen correcciones, mejoras y nuevas características del programa. Todas las versiones son gratis para todos los usuarios.
24/11/2014
La última versión integra dos nuevos módulos, Excavación en pozo para diseño de excavaciones circulares y el módulo de MEF - Consolidación. Además la versión 19 presenta nuevas características, incluyendo una forma general para el encepado de pilotes y para el pilote en el módulo Grupo de Pilotes, importación universal de tabla de datos y demás mejoras para las aplicaciones de GEO5.
También se lanzan versiones en Alemán e Italiano, incluyendo los reportes de salida, estándares, normas adicionales y presentamos los Manuales de Ingeniería y Guías de Usuario en diferentes idiomas con la cooperación continua de nuestros distribuidores y socios locales.
Vea la lista detallada de las mejoras. Descargue la versión demo de GEO5 v19 para probar nuestro software sin ninguna limitación de análisis ni cálculo!
Cómo actualizar?
Aquellos suscritos al programa de mantenimiento tienen la ventaja de la actualización inmediata de forma gratuita. Los demás usuarios GEO5 pueden obtener la última versión mediante la compra de la actualización individual.
El costo de la actualización individual de V18 a V19 corresponde al 10% del valor sobre todas las licencias adquiridas.
Los precio de actualización desde versiones anteriores puede obtenerse en nuestra tienda online iniciando sesión en su cuenta.
07/10/2014
El software geotecnico GEO5 , desarrollado por Fine s.r.o., fue galardonado con el premio "Top Builder 2014" en Polonia. La entrega de dicho premio es organizada por la muy reconocida revista Builder. Los ganadores fueron anunciados durante la feria internacional de la construcción "BUDMA 2014".
Monika Mitew-Czajewska (MMGEO), nuestra distribuidora exclusiva en Poland, fue quien recibió el premio “Top Builder 2014”
12/05/2014
La nueva versión de GEO5 permite la verificación de secciones transversales de acero y RC en "Verificación de muros pantalla”, nuevos tipos de cimentación para aplicaciones de muros, Capacidad portante horizontal según Broms en "Pilotes" y otras características y mejoras de todos los programas GEO5.
También lanzamos capítulos adicionales del Manual de ingeniería para el modelado numérico y análisis en GEO5 - Aplicación MEF. (En ingles, próximamente también en español). Usted puede ver la lista completa de mejoras.
Como Actualizar ?
Los usuarios registrados al programa de mantenimiento, pueden actualizar inmediatamente en forma gratuita.
Los demás usuarios de GEO5 pueden obtener la última versión comprando la actualización individual.
El costo de la actualización individual de la v17 a v18 = 10% del precio de la licencia completa
El costo de la actualización individual de versiones anteriores pueden obtenerse en la tienda Online – Ingrese a su cuenta.
Descargue la Demo de GEO5 v18 - y pruebe nuestro software sin ninguna limitación en el análisis!
30/10/2013
El lanzamiento de GEO5 versión 17, reúne los estándares LRFD 2012, verificación de elevación de Zapatas, métodos Bustamante en micropilotes y mucho mas...
También estamos lanzando dos nuevas partes de del Manual de Ingeniería, la primera parte se centra en el análisis de pilotes y la segunda en el análisis de elementos finitos.
Usted puede leer la lista completa de mejoras.
Los abonados al programa Mantenimiento Fine pueden aprovechar la actualización inmediata a GEO5 versión 17.
Los demás usuarios de GEO5 pueden obtener la versión más reciente mediante la compra de la actualización individual. Actualización individual de v16 a v17 = 10% del precio en todas las licencias.
El precio de la actualización individual desde versiones anteriores puede conseguirlo con facilidad en nuestra tienda e-shop - Ingrese a su cuenta.
Descargue la Demo de GEO5 v17 - y pruebe nuestro software sin ninguna limitación en el análisis!
Síganos en las redes sociales – Convirtiéndote en nuestro fan en Facebook o suscribiéndose a nuestros videos en Youtube, puede asegurarle estar siempre al tanto de las últimas noticias sobre GEO5.
03/06/2013
Lanzamiento de la Nueva versión 16 de GEO5. Presenta mejoras significativas en el programa MEF, importación automática DXF de estructuras y otras mejoras
Estamos orgullosos de anunciarles el lanzamiento de la nueva versión 16 de GEO5, la cual viene con mejoras significativas en el programa MEF, importación automática DXF de estructuras y muchas otras modificaciones y mejoras en todos los programas GEO5.
Pruebe usted mismo la nueva versión demo, la cual le permite utilizar GEO5 sin ninguna limitación. Solo los reportes de salida no podrán ser impresos.
Los suscriptos al programa de mantenimiento FINE, pueden descargar la versión 16 de GEO5 en forma gratuita. Los demás usuarios de GEO5 pueden obtener la última versión comprando la Actualización individual.
También lanzamos el nuevo material de capacitación - Manual de ingeniería - próximamente también en español.
El manual de ingeniería es el nuevo material de capacitación para ingenieros, estudiantes y profesores. Explica cómo resolver un problema determinado con los programas GEO5. Éste fue creado para responder a las frecuentes consultas enviadas por los usuarios. El manual actual consta de 12 capítulos de entrenamiento. El libro “Manual de ingeniería” puede ser descargado en forma gratuita. .
18/01/2013
La nueva versión de GEO5 ha sido lanzada con un nuevo sistema de administración de configuración de análisis, el nuevo programa Grupo de pilotes y muchas otras mejoras.
Estamos felices de anunciarles el lanzamiento de GEO5 versión 15. El cambio más importantes en la versión 15 es el nuevo sistema de entrada de configuración de análisis, el cuál hace el trabajo con los diferentes programas mucho mas confortable.
También lanzamos el tan esperado programa Grupo de pilotes. Y presentamos además muchas modificaciones y mejoras en todos los programas GEO5.
Pruebe las nuevas características con la versión demo (v15).
Aquellos usuarios suscriptos al programa de mantenimiento Fine, pueden descargar la versión 15 de forma gratuita. Los demás usuarios de GEO5 puede adquirir la última versión comprando la Actualización Individual.
18/01/2013
El nuevo programa Grupo de pilotes ha sido lanzado junto con la versión 15 de GEO5. Este programa se utiliza para análisis de grupo de pilotes (placa de cimentación rígida, tapa de pilote).
Nos enorgullece presentarte el nuevo programa – Grupo de pilotes. Este programa se utiliza para análisis de grupo de pilotes (placa de cimentación rígida, tapa de pilote), a través de los métodos Spring (MEF) y enfoques analíticos.
Usted podrá encontrar más información sobre el programa Grupo de pilotes o descargar la versión demo (v15) y probarlo usted mismo.
O puede ver las otras mejoras en la versión 15 del conjunto de programas GEO5.
22/08/2012
Lanzamiento de la versión 14 en español de los programas GEO5. Con mejoras como: Simetría axial (radial) en los programas MEF, estándares Ruso y Chino (SNIP, GB), impresiones gráficas con tablas de suelos.
Encuentre más información sobre mejoras, nuevas herramientas y características de la versión 14 de GEO5 y pruebe todas sus funciones con la versión Demo.
Los subscriptos al programa de mantenimiento Fine, ya pueden instalar la versión 14 de GEO5. Los demás usuarios de GEO5 pueden obtener la última versión comprando la Actualización Individual.
20/04/2012
En el año 2012, la compañía FINE, festeja un nuevo logro, el de expandir su marca y llevar sus productos a toda América Latina desde la ciudad de Rosario - Argentina.
FINE ofrece productos a través de sus distribuidores en 20 países y en 9 idiomas diferentes. A partir del año 2012 también se hace presente en América Latina - Argentina, con las últimas versiones y actualizaciones de todos sus productos en el idioma Español.
16/11/2020
The new edition introduces the new feature Annexes in all programs, two new modules (Stratigraphy - Earthworks and FEM - Earthquake), and many other improvements.
07/10/2020
GTL Geotech Services, our partner in Indonesia, is organizing one day webinar "Application of GEO5 in geotechnical engineering". The webinar will be conducted by Dr. Gouw (7th October 2020).
01/10/2020
Start Consult EOOD, our dealer in Bulgaria, will attend the “XIII. National Transport Infrastructure Conference”. The conference will be held from 1 to 3 October 2020 in Nessebar, Bulgaria. Feel free to visit their booth.
02/09/2020
ALLBIM NET, our partner in Romania, organizes a series of webinars for geotechnical engineering from 2 to 4/September/2020. You can join webinars "BIM Workflow in Geotechnical Engineering", "FEM and Slope Stability" or "Modelling of Deep Excavations".
25/07/2020
RD Technology and Consultant design construction Joint stock, our new distributor in Vietnam, will be holding a seminar at Ho Chi Minh City University of Technical Education On July 25.
17/06/2020
ETIA, our partner in Australia, is organizing one-day webinar "Slope Stability Design Workshop". This one-day online worshop is aimed at civil and structural engineers who wish to design against the potential failure of sloping sites. The webinar will be live streamed via Zoom.
16/06/2020
ETIA, our partner in Australia, is organizing one day webinar "Retaining Walls Design Workshop". This one-day webinar is primarily aimed at civil and structural engineers who wish to design retaining walls. The webinar will be live streamed via Zoom.
08/06/2020
The Spring Update brings more than 30 improvements across all GEO5 programs and introduces new engineering manuals. Get more information about GEO5 Spring Update.
21/03/2020
Many of our users now have to work from home. We would like to help in this difficult situation and offer the following options:
Switch to Network license for half price
You can switch the local license to the network license for 15% of the program price (standard offer is 30 %) and the cost of network hardware key. The program version you are using will remain the same. If you would like to use the latest Edition 2020 you need to buy the Upgrade first.
Additional license for half price
We offer the second and additional licenses for 50 % off the standard price. The offer applies to additional local licenses as well as network licenses. The additional licenses will be in the same version as you are using now. If you would like to use the latest Edition 2020 you need to buy the Upgrade first.
Use temporary Software Key (Local)
The ordered hardware key for the local license can be temporarily replaced by a software key, which is sent via email immediately. The hardware key will be delivered as soon as possible. You pay the cost of the hardware and the software key.
If interested, please, contact us via email hotline@fine.cz. The offer is valid until further notice depending on the current situation.
27/03/2020
Fine Soft, our partner in Russia, will attend the IV. International Scientific and Technical Conference in Brest on March 27th, 2020.
07/07/2020
MMGEO, our distributor in Poland, will attend the geotechnical conference "ProGeotech 2020" in Warsaw from July 7th to 8th 2020.
16/03/2020
ETIA, our partner in Australia, is organizing one day workshop "Shallow Foundations Design" using GEO5 programs for Shallow Foundation Design and Settlement Analysis. The workshop will be held on March 16 in Sydney.
25/02/2020
Gintegro, our exclusive US distributor, will attend the conference Geo-Congress 2020 which will be held February 25 - 28, 2020 in Minneapolis.
20/02/2020
ETIA, our partner in Australia, is organizing one day workshop "Residential Slabs & Footings" using GEO5 program Spread Footing and Settlement. The workshop will be held on February 20 in Auckland, New Zealand.
12/02/2020
ICC Colombia, our dealer in Colombia, will attend the geotechnical conference "VI Conferencia Regional De Geotécnia” at the University of Ibagué from 12th to 14th February 2020.
04/12/2019
Infrasys, our partner in Philippines, will attend the conference "GEOCON 2019" at the Manila Hotel from 4th to 5th December 2019.
03/12/2019
We will meet with our technology partner Redi-Rock Inc.(USA) at their European Regional Meeting in Liege from 3 to 5 December 2019.
26/11/2019
Fine Soft, our partner in Russia will be delivering a training course for practical use of GEO5 software. The course will be held from November 26 to 29, 2019 in St. Petersburg.
01/11/2019
The Edition 2020 introduces the new tool Annotations in all GEO5 programs, simplified 3D subsoil modeling in Stratigraphy and many other improvements across all GEO5 programs.
21/11/2019
Arya Consult, our reseller in Norway, will attend the seminar "Geotechnical and rock mechanics day" in Oslo from 21st to 22nd November 2019.
21/11/2019
Eiseko, our partner in Italy, will attend the conference "DIGITAL&BIM Italia" in Bologna from 21st to 22nd November 2019.
20/11/2019
Fine company will be attending the "26th Concrete Days 2019" conference in Hradec Kralove from 20th to 21st November. Come and visit our booth.
17/11/2019
Fine will attend the XVI Panamerican Conference on Soil Mechanics and Geotechnical Engineering in Cancún from 17th to 20th November 2019.
07/11/2019
ICC Colombia, our dealer in Colombia, will attend the conference "Jornadas: XXI Estructurales y XVIII Geotécnicas" in Bucaramanga from 7th to 9th November 2019. Feel free to visit their booth no.5 to find out more about improvements in GEO5 software.
11/11/2019
Fine will present GEO5 software on “47th Conference Foundations Brno - 2019”, which is organized by the Czech Geotechnical Society. The conference will be held in Brno from 11th and 12th November 2019.
31/10/2019
Arya Consult, our reseller in Norway, will promote the FIN EC software on the seminar "Norwegian steel structure day" in Oslo on 31st October 2019.
06/11/2019
Allbim, our partner in Romania, will organize the international BIM conference for bridge design "Bridge Day" in Bucharest on 6th November 2019.
05/11/2019
Our partner AL- IS will attend the conference Geotechnics Day 2019: “The future of Geo-Engineering” in Breda on November 5th, 2019.
18/10/2019
3DR Engineering Software Ltd., our dealer in Greece, will be attending the ''OIKODOMH EXPO" at Metropolitan Expo, Athens, Greece from 18th to 20th October 2019.
17/10/2019
CAD Solucoes, our partner in Brazil, will be attending the geotechnical conference "XII Simpósio de Prática de Engenharia Geotécnica da Região Sul" in Joinville, Santa Catarina from 17th to 19th of October 2019.
03/10/2019
Eiseko, our partner in Italy, will attend "XXVII CONGRESSO CTA" in Bologna from 3rd to 5th October 2019.
05/09/2019
3DR Engineering Software Ltd., our dealer in Greece, will attend the 4th National Conference on Earthquake Engineering and Engineering Seismology taking place in Athens, Greece (5-7 September 2019). Come and find out news in GEO5 software.
28/08/2019
Our partner Ignacio Zuloaga (geotecnia.ONLINE) will attend the geotechnical congress "XIV Congreso de Ingeniería Civil" in Panama City this August from 28th to 31st.
11/06/2019
We took over Altap company, a well-known Salamander software supplier. By this growth, we acquire an experienced development team for file and document management tools and we can also provide Altap Salamander software for free. More at www.altap.cz.
29/07/2019
Infrasys, our partner in Philippines, recently concluded the PICE 1st Mindanao Geotechnical Engineering Conference, Grand Men Seng Hotel, Davao City on 29-30 July.
25/06/2019
Oitec Ltda., our partner in Chile, will be attending “Latin America Earthquake Impact Mitigation Summit” in Santiago this June from 25th to 26th.
26/06/2019
Itech, our partner in France, will present GEO5 software at the SolScope 2019 in Marseille at Parc Chanot on June 26th and 27th, 2019.
10/05/2019
We introduce GEO5 2019 Spring Update news. Get more information about GEO5 Spring Update.
13/06/2019
Baldinistudio, our partners in Croatia, will be attending the 14th Annual Meeting of Croatian Chamber of Civil Engineers in Opatija from 13th to 15th of June 2019.
06/06/2019
The new Edition of GEO5 software will be presented at "12. Freiberger Geotechnik Kolloquium" in Freiberg on 6th June 2019 by Mr. Juraj Ortuta, our dealer.
04/06/2019
Solucoes CAD-BIM, our partner in Brasil, will attend the 9th Seminar on special foundations and geotechnical engineering - SEFE 9. The event will be held from June 4 to 6, 2019, in São Paulo. Come and visit our booth no 33.
23/05/2019
Allbim, our partner in Romania, will attend the XXIX. National Engineering Conference of Structural Engineering Association (AICPS) in Constanta from 23th to 24th May 2019.
02/04/2019
We support International Academic Competition - The Hall of the Year organised by Faculty of Civil Engineering, CTU in Prague. Students, do you like challenges? The task of this year competition is to design and fabricate a model of a salt storage yard roofing with a conveyor. Hurry up, the deadline for registration is the 4th of April!
02/04/2019
JSC Reconstruktsiya, our partner in Russia, will present the GEO5 software at the international exhibition "MosBuild 2019". The event will be held at the Crocus Expo in Moscow (2 - 5 April 2019).
03/04/2019
Oitec Ltda., our partner in Chile, will be attending the XII Chilean Conference on Seismology and Earthquake Engineering. The event will be held on April 03 to 05 2019 at the Isla Teja Campus of the Universidad Austral de Chile, in the city of Valdivia.
18/03/2019
Join us for one-day GEO5 FEM workshop focusing on some of the advanced topics such as:
We will concentrate mainly on the modelling aspects FEM and less on the user interface. Users without previous hands-on experience with the program are encouraged to go through the demo models. Sharing your questions or insights about concrete FEM models is highly appreciated and encouraged.
This workshop is for free, but can only accept limited amount of attendees – don´t wait to register (mail to: johana.baborova@fine.cz).
28/03/2019
ICC Colombia will be delivering a training course on foundations design by using the LRFD method in Bogota (28-30 March 2019).
13/03/2019
Our partner Baldinistudio will present GEO5 software at 23th International Construction Fair in form of a seminar. The fair is organized from 13th to 16th March 2019 in Banja Luka, Bosnia.
16/04/2019
Our partner Balidinistudio will present GEO5 at the Expokos Fair in form of a seminar. The international fair will be held at the Palace of Youth, Prishtina (16 - 18 April, 2019).
06/06/2019
JSC Reconstruktsiya, our partner in Russia, will present the GEO5 software at the international exhibition "GeoInfo EXPO - 2019". The event will be held at the Sokolniki Exhibition and Convention Center in Moscow (6 - 7 June 2019).
06/02/2019
JSC Reconstruktsiya, our partner in Russia, will attend the international conference on geotechnics "Fundamentals and Applications in Construction (GFAC 2019)" hosted by Saint Petersburg State University of Architecture and Civil Engineering from 6th to 8th February 2019.
03/06/2019
We will attend the 14th International Conference "Underground Construction Prague 2019”, which will be held in Prague, June 3 – 5, 2019. Come and visit our booth.
15/11/2018
We are pleased to announce that GEO5 2019 is now on general release. This release includes major developments to the Stratigraphy program, site investigation Logs and Cross Sections modules, the BIM functionality and the ability to display structure and/or site locations in Google Maps.
We now offer six standard packages, each package is comprised of several programs, at very attractive prices together with discounted annual maintenance and lease plans.
Get more information about new Edition 2019.
25/10/2018
Allbim, our partner in Romania, will attend the international conference "Architecture, Technology and the City" at the Technical University of Cluj-Napoca from 25th to 26th October 2018.
17/10/2018
Allbim, our partner in Romania, will attend the "53rd National AIIR Conference" in Sinaia from 17th to 19th October 2018.
08/10/2018
Gintegro, our US distributor, conducted three-day GEO5 training at the Ministry of Transportation in St Vincent and Grenadines.
03/10/2018
GEOgrup Insaat, our partner in Turkey, will be attending the "Road to Tunnel Expo 2018" on 3-6 October 2018 in Istanbul.
26/09/2018
GEOgrup Insaat, our partner in Turkey, will be attending the "17th National Conference on Soil Mechanics and Geotechnical Engineering" on 26-28 September 2018 in Istanbul which is organized by Turkish Society for ISSMGE.
07/11/2018
ICC Colombia, our dealer in Colombia, will attend the "XVI Congreso Colombiano de Geotecnia” in Paipa, Colombia. Feel free to visit their booth no.6 to find out more about improvements in GEO5 software.
19/11/2018
Fine company will support the 46th Foundation Engineering Conference as the main sponsor and present the new GEO5 2019 Edition. The conference will be held in Brno (Czech Republic) from 19th to 20th November 2018. Come and visit our booth.
03/12/2018
Oitec Ltda., our partner in Chile, will be attending “X Chilean Congress in Geotechnical Engineering” in Valparaiso, Chile (3rd - 5th December 2018).
19/09/2018
Due to demand, Infrasys has scheduled additional 1 day introductory training courses for GEO5 Geotechnical Analysis and Design software at Infrasys Training Center, Pasig City in August and September, 2018.
21/11/2018
Fine will attend the XXIX Geotechnical Engineering Conference (XXIX Reunión Nacional de Ingeniería Geotécnica) in León, Guanajuato from 21st to 24th November.
30/07/2018
Our partner ALLBIM NET (Romania) together with the Ovidius University of Constanta organise the Summer School - the week of intensive training for students who want to improve their knowledge of GEO5 and other structural engineering software (Allplan, SCIA Engineer).
21/06/2018
Allbim, our partner in Romania, will present GEO5 as a part of solutions for hydro structures during the 4th International Conference "Water Across Time in Engineering Research - WATER 2018". The conference will be held at the Ovidius University of Constanta in Romania (June 21-23, 2018).
18/06/2018
3DR Engineering Software Ltd., Ltd., our dealer in Greece, will be attedning the 16th European Conference on Earthquake Engineering in Thessaloniki, Greece (18-21 June).
26/05/2018
5th Fine Dealer´s Meeting took place on May 17-18, 2018 in Prague. Over 30 participants from 25 companies worldwide gathered in the Hotel Pyramida for two intense working days. The meeting featured selected talks from geotechnical engineers and developers from Fine company.
All in all, the meeting was a success not only because it brought together all the partners, but also it was an opportunity to share experiences and shows the growing potential of GEO5 software. Take a look at more photos on our Facebook page.
14/05/2018
Allbim, our partner in Romania, will attend the "XXVIII. National AICPS Conference" in Cluj-Napoca from 14th to 15th May 2018.
10/05/2018
Allbim, our partner in Romania, is attending the "Symposium of Technologies and Advanced Building Materials" at the Ovidius University in Constanta from 10th to 11th May 2018.
04/04/2018
April 4-5, the University of Transport will host the XV International Scientific and Technical Conference "Modern Problems of Design, Construction and Operation of the Railway Track" dedicated to the memory of Professor Georgy Shakhunyants.On April 5, the technical support specialist Bulatov Dinar will tell you how to use software for designing in difficult conditions with the example of the Gabion Wall module.
30/03/2018
On March 30, the conference "Young Science" will be held at the Federal State Institution of Education "Russian University of Transport". Representative of the company "Reconstruction" Dyatlova Kseniya will tell the report about the module "Stratigraphy" within the framework of this conference. Cooperation with University has been ongoing since 2010. We take part in university conferences, including in the Shahunyants' Readings.
07/05/2018
Spring update brings a number of improvements in our programs:
Learn more about our Spring update or try the Demo version.
Site Investigation module release is postponed to November 2018, as we want to support all requested functions in the required quality.
As our apologize Stratigraphy users will receive 2019 version for free.
Fine Maintenance subscribers and GEO5 2018 users can download and install the Spring Update for free. Other users can calculate the price of the Single Upgrade in our Shop - just log into your account.
27/05/2018
12/04/2018
ICC Colombia, our dealer in Colombia, will attend the conference "Jornadas Geotécnicas y Estructurales" in Bogotá this April 12th and 13th.
05/03/2018
Fine and Infrasys, our partner in Philippines, organized training of GEO5 2018 for DPWH at Head office in Manila from 5 to 9 March 2018.
15/02/2018
JSC Reconstruktsiya presented GEO5 in the XI All-Russian conference "Actual problems of designing roads and artificial structures" in St. Petersburg during 15th and 16th February 2018.
14/06/2018
Geoportal and Baldinistudio, our partners in Croatia, will be attending the Annual Meeting of Croatian Chamber of Civil Engineers (13. Dani ovlaštenih inženjera građevinarstva) in Opatija from 14th to 16th of June 2018. Stop by their booth and get information about latest Edition of GEO5 geotechnical software.
08/01/2018
The GEO5 software has been localized to Bulgarien language in cooperation with Start Consult EOOD, our Bulgarian partner. Enjoy a wide scale of programs in different language versions for your foreign contracts. GEO5 is currently in 17 languages!
20/01/2018
ICC Chile will be delivering online webinar on Deep and Shallow Foundations Design this January 20th from 11am (GMT-5).
20/12/2017
Our partner "JSC Reconstruktsiya" (Russia) will hold the last webinar on "Practical examples". It shows the work with the software GEO5 (Slope Stability, Settlement and MSE Wall). The webinar will be held on 20th December from 10:00 to 11:30 (Moscow time).
03/11/2017
The new Edition brings two new programs Stratigraphy and Spread Footing CPT. It also features number of major improvements.
Watch a short video about Stratigraphy program for assessment of results from site investigation.
Take a look at more information about new GEO5 2018 Edition.
Try our Demo Version for yourself.
13/11/2017
Fine and Infrasys, our partner in Philippines, presented GEO5 Geotechnical Solutions to the DPWH Regional Office XIII in Butuan City.
27/11/2017
ICC Colombia will be delivering free online webinar in Spanish language "Introduction to shallow and deep foundations using GEO5" this November 27th from 7pm (GMT-5).
13/11/2017
Fine company will support the 45th Foundation Engineering Conference in Brno, Czech Republic (13-14 November 2017) as the main sponsor. Also the winners of the eleventh edition of the Student Competition, which is organized together with Mott MacDonald company, will be revealed.
22/11/2017
JSC Reconstruktsiya, our partner in Russia, will be attending the conference "Design of transport infrastructure" from 22nd to 24th November 2017 in St. Petersburg. One of the presenters will be Vladimir Kogan (CEO, JSC Reconstruktsiya).
25/10/2017
Fine will be attending the 5th edition of GEC Geotechnics expo & congress. The event will be held at the Exhibition Center Offenburg in Germany (25th - 26th October 2017). Visit our booth no. 34.
10/11/2017
infraSys, our partner in Philippines, is organizing a half-day seminar on foundation design using GEO5 software in Manila (10th November 2017). The presenter will be Jiri Laurin (CEO, Fine Ltd.).
22/11/2017
GEOgrup Insaat, our partner in Turkey, will be attending the “7th Geotechnical Symposium” in Istanbul from 22nd to 24th November.
20/10/2017
ICC Colombia will be delivering a training course on Deep and Shallow Foundations Design in Bogota (20-22 October 2017).
20/10/2017
ICC Chile will be delivering a training course on Retaining Wall Design in Santiago (20-22 October 2017).
10/10/2017
JSC Reconstruktsiya, our partner in Russia, is attending the "International specialized exhibition-forum ROADEXPO" in Moscow (10th - 13th October 2017).
12/10/2017
Start Consult GmbH, our partner in Austria, will be attending the 66. Geomechanik Kolloquium in Salzburg from 12th to 13th October 2017.
16/10/2017
K DMAC Technology, our partner in Malaysia, will be attending the "2-Days Seminar on Geotechnical Engineering" in Alor Gajah (16th and 17th October 2017).
18/10/2017
GEOgrup Insaat, our partner in Turkey, will be attending the “The Third International Soil-Structure Interaction Symposium” in Izmir from October 18 to 20, 2017.
28/09/2017
Intelligent BIM Solutions will introduce GEO5 software together with other products in Tallin on 28th September 2017.
28/09/2017
Start Consult GmbH, our partner in Germany, will be attending the annual symposium 13. Fachtagung Konstruktiver Ingenieurbau in Berlin 28th September 2017.
04/09/2017
Fine company will be sponsoring the conference "XV. hydrogeologický kongres" in Brno, Czech Republic (4 - 7 September 2017).
14/08/2017
Prof. Ing. Edinson Guanchez and Prof. Heriberto Echezuria (Sísmica Adiestramiento) are organizing the online course "Geotechnical and Structural Design of Deep Foundations". The course will last from August 14 until September 25, 2017.
31/08/2017
ICC Colombia will be delivering a training course on deep and shallow foundation design in Quito (from 31/08/2017 to 2/09/2017).
04/09/2017
Fine will be attending the conference "Seminario Carreteras de Montaña" in San José this September 4th and 5th.
06/09/2017
Fine and Start Consult GmbH, our partner in Germany, will be attending the geotechnical conference Fachsektionstage Geotechnik in Würzburg from 6th to 8th September 2017.
27/07/2017
Prof. Ing. Edinson Guanchez (Sísmica Adiestramiento) is organizing the online webinar "Geotechnical and Structural Design of Piles subjected to lateral loads". The webinar will be held on July 27, 2017, from 17.00 (CEST).
27/07/2017
ICC Colombia will be delivering a training course on deep and shallow foundation design in Quito (27-28 July 2017).
07/04/2017
07/06/2017
Fine company will be attending “68. Berg- und Hüttenmännische Tag” conference organized by TU Bergakademie Freiberg (7-9 June 2017).
08/06/2017
Geoportal is attending the Annual Meeting of Croatian Chamber of Civil Engineers (12. Dani ovlaštenih inženjera građevinarstva) in Opatija from 8th to 10th of June 2017. Stop by their booth and get information about latest Edition of GEO5 geotechnical software.
09/06/2017
ICC Colombia will be delivering a training course on deep and shallow foundation design in Bucaramanga (9 - 11 June 2017).
05/05/2017
Spring update brings the new Software key option (Node-lock) and also a number of improvements and new features in our programs:
We would also like to introduce our new software package GEO5 Redi-Rock Wall for a complete design of prefabricated retaining walls using the system by Redi-Rock Inc. (USA).
Learn more about our Spring update or try the Demo version.
Fine Maintenance subscribers and GEO5 2017 users can download and install the Spring update for free. Other users can calculate the price of a Single Upgrade in our Shop – all you need to do is log in to your account.
24/05/2017
GEOgrup Insaat, our partner in Turkey, will be participating in the “Road 2 Tunnel Fair” in Ankara (May 24 – 26).
20/04/2017
Start Consult GmbH, our partner in Austria, will be attending the 32nd Christian Veder Kolloquium at the Graz University of Technology from 20th to 21th April 2017.
26/05/2017
ICC Chile will be delivering a training course on deep and shallow foundation design in Santiago this May 26th, 27th and 28th.
22/03/2017
Nanjing Kulun Software Technology Co. Ltd., our Chinese partner, organized training course for using GEO5 programs.
04/04/2017
TotalCAD, our partner in Brazil, will be attending the 23rd international construction and architecture trade show Feicon Batimat in Sao Paulo (4 - 8 April 2017).
31/03/2017
ICC Colombia will be delivering a training course on Foundation Design in Bogotá (31st March - 2nd April).
28/03/2017
G2 Ingeniería, our partner in Mexico, will be attending the conference 5 Jornada técnica internacional de pavimentos in Querétaro (28 - 30 March).
24/03/2017
The short marketing and technical course on GEO5 was conducted by Mr. Gouw (GTL Geotech Services) in Jakarta, Indonesia (23 March, 2017).
22/03/2017
Start Consult GmbH, our partner in Germany, attends the conference HEUREKA'17 in Stuttgart (22 - 23 March 2017).
16/03/2017
G2 Ingeniería, our partner in Mexico, is organizing one day seminar on Slope Stability Design using GEO5 software (16th March, 2017).
07/03/2017
MMGEO, our distributor in Poland, will present the GEO5 software on the "XXXII Ogólnopolskie Warsztaty Pracy Projektanta Konstrukcji" in Wisla, Poland (7 - 10 March 2017).
12/03/2017
We were at Geotechnical Frontiers 2017 in Orlando, Florida - together with Gintegro, our exclusive US distributor, and Redi-Rock Inc., our technology partner.
11/03/2017
CEIM-PERU, our partner in Peru, will organize a seminar about GEO5 in Cusco on 11th March.
23/02/2017
Fine and Intelligent BIM Solutions, our partner in Latvia, will present GEO5 software in Riga on 23rd February.
22/02/2017
Fine and Intelligent BIM Solutions, our partner in Lithuania, will present GEO5 software in Vilnius on 22nd February.
19/02/2017
Civisoft, our partner in Algeria, organized training of GEO5 2017 for SEROR company in Tlemcen (Algeria) from 19 to 24 February 2017. The purpose of this training is to present the new GEO5 2017 enhancements, and apply the tutorials of the GEO5 software.
18/01/2017
Start Consult EOOD, our partner in Germany, attended the 14th Geotechnical seminar in Biberbach University on Wednesday 18th January 2017.
08/02/2017
Start Consult EOOD, our partner in Germany, attended the geotechnical conference 11. Tiefbaufachtagung in Dresden from 8th to 9th February.
31/10/2016
GEO5 2017 features many changes and improvements. Simply try our Demo version without any analysis restrictions.
Fine Maintenance subscribers can download and install the new Edition for free. Other customers can calculate the price of their Single Upgrade in our Shop – just sign into your account or contact us.
Fine Maintenance subscribers can also enjoy the new discount on purchase of new programs or additional licenses of already purchased programs.
05/12/2016
Fine and Oitec Ltda., our partner in Chile, will be attending “IX Chilean Congress in Geotechnical Engineering” in Valdivia, Chile (5 - 7 December 2016).
16/11/2016
Start Consult EOOD, our partner in Germany, will be attending the 4th edition of GEC Geotechnics. The event will be held at the Exhibition Center Offenburg in Germany (16th - 17th November 2016).
19/10/2016
The short course for using GEO5 programs will be performed by Mr. Gouw (GTL Geotech Services) in Jakarta, Indonesia. The course shall be conducted on 19th and 20th October 2016.
30/09/2016
The GEO5 geotechnical software suite passed the evaluation process and met all the criteria set by the Ministry of Housing and Urban-Rural Development of the People’s Republic of China (MOHURD).
Nanjing Kulun software, our exclusive dealer in China, satisfied the extensive requirements regarding standards, specifications and methods of analysis. A committee of eight experts found GEO5 software suitable to perform geotechnical analyses with credible results based on theory and engineering experience.
GEO5 now joins the few civil engineering programs chosen to receive this certification, which is also a testament to the quality of GEO5 solutions and its commitment to the Asian market.
14/11/2016
Fine company supported the 44th Foundation Engineering Conference in Brno, Czech Republic (14-15 November 2016) as the main sponsor. Also the winners of the eight edition of the Student Competition, which is organized together with Mott MacDonald company, were revealed.
The winner of the competition in the category of "diploma thesis" is Ing. Tomáš Philipp (ČVUT Praha) for his work "Application of jet grouting for foundation engineering".
The winner of the competition in the category of "bachelor's thesis" is Bc. Tomáš Urbánek (VŠB-TUO) for his work "Variant Methods of Metro Station Realization".
21/11/2016
Techgrade Consulting, our partner in Nigeria, will be attending “National Engineering Conference” in Uyo, Nigeria (21 - 25 November 2016).
11/11/2016
We will introduce a new Edition 2017 of the GEO5 software on 45. Geomechanik-Kolloquium in Freiberg (11th November 2016).
25/11/2016
ICC Chile will be delivering a training course on retaining walls and gabions in Santiago this November 25th, 26th and 27th.
29/10/2016
ICC Colombia will be delivering a training course on deep and shallow foundation design in Cali this October 29th and 30th.
14/10/2016
ICC Chile will be delivering a training course on deep and shallow foundation design in Santiago this October 14th, 15th and 16th. Visit their pages for more information about the event.
08/07/2016
ICC Chile will be delivering a training course on retaining wall design in Santiago this July 8-9.
10/06/2016
We are pleased to announce the release of the update of Redi-Rock Wall Freeware, which brings following improvements:
• New graphical user interface
• Automatic notification of new versions
• Simplified stone leveling pad input options
• Changes to the surcharge and load input options
Redi-Rock Wall Analysis Software is freeware tool package specifically created for Redi-Rock Inc. (USA) to analyze gravity walls and take full advantage of the multiple solutions provided by Redi-Rock.
Existing software users can get the updates by running the "Update GEO5 for Redi" program that was installed with Redi-Rock Wall or simply download the Redi-Rock Wall for Free.
Also the verification manuals for GEO5 Redi Rock Wall in metric as well as imperial units has been released.
03/05/2016
Spring update of the GEO5 2016 software brings:
Furthermore, we present new training materials, as well as updated materials for GEO5 2016.
Take a look at more information about Spring Update or simply try our Demo Version for yourself.
Fine Maintenance subscribers and GEO5 2016 users can download and install the Spring Update for free. Other users can calculate the price of the Single Upgrade in our Shop – just log into your account.
05/10/2016
ICC Colombia, our dealer in Colombia, will attend the "XV Congreso Colombiano de Geotecnia” in Cartagena (October 05-06). Feel free to visit their booth to find out more about improvements in GEO5 software.
13/10/2016
Geogrup, our dealer in Turkey, will be attending the National Geotechnical Congress “16. Ulusal Zemin Mekaniği ve Geoteknik Mühendisliği Kongresi”. The event is organized by ISSMGE and will be held in Erzurum, Turkey on 13-14 October.
13/10/2016
Nanjing Kulun Software Technology Co. Ltd., our Chinese partner, will be the main sponsor of the 10th National Geological Congress in Chengdu ( 13th-18th October). Feel free to visit their booth to find out more about improvements in GEO5 software.
19/11/2016
ICC, our dealer in Colombia, will be delivering a training course on Shallow Foundation Design in Quito this November 19th and 20th.
14/11/2016
Fine will be main sponsor of “44rd Conference Foundations Brno 2016”, which is organized by the Czech Geotechnical Society (14-15 November 2016). Fine will introduce the new Edition of GEO5 geotechnical software. And also announce the results of 10th edition of the Student Competition, which is organized together with Mott MacDonald company.
23/11/2016
Fine will be attending XXVIII Geotechnical Engineering Conference (XXVIII Reunión Nacional de Ingeniería Geotécnica) this year in Mérida, Yucatán (23-26 November 2016). Stop by booth 33 and say hello!
24/11/2016
Vietnam Investment Consulting and Construction Designing JSC, our distributor in Vietnam, will be attending the “GEOTEC HANOI 2016” conference. The newest GEO5 software in Vietnamese language version will be presented. The conference will be held on 24th and 25th November 2016 in JW Marriott Hotel in Hanoi.
07/09/2016
Fine and Proexrom SRL, our partner in Romania, will support the "XIII National Conference of Geotechnical Engineering" and present the new GEO5 2016 Edition. The conference will be held on September 7 to 10 in Cluj-Napoca and is organized by the Romanian Society of Geotechnics and Foundations (SRGF) and hosted by the Technical University of Cluj Napoca.
19/08/2016
ICC Colombia will be delivering a training course on Slope Stability Design in Bogotá this August 19th, 20th and 21th. Visit their pages for more information about the event.
06/07/2016
itech, our partner in France, will exhibit at "Journees Nationales de Geotechnique et de Geologie de L´Ingenieur" conference in Nancy (July 6 - 8, 2016). Join itech to find out more about latest Edition of GEO5 software.
28/06/2016
3DR Engineering Software Ltd., Ltd., our dealer in Greece, will be be supporting the “1st International Conference on Natural Hazards and Infrastructure” in Chania, Crete Island, Greece (28-30 June).
Join 3DR to find out more about latest Edition of GEO5 software.
27/06/2016
Start Consult EOOD, our dealer in Bulgaria, is attending the “VII International Conference on Geotechnics”. The Conference will be held from 27 to 1 July 2016 at International House of Scientists "Fr. J. Curie", Varna, Bulgaria. The main organizer of the conference is the Scientific and Technical Union of Mining, Geology and Metallurgy. Join Start Consult at their booth!
23/06/2016
MMGEO, our distributor in Poland, will be delivering a one day short course on geotechnical design “Projektowanie geotechniczne z wykorzystaniem oprogramowania GEO5” this June 23rd in the city of Warsaw, Poland.
The course will be held in Warsaw University of Technology and is prepared in cooperation with Engineering Institute.
21/06/2016
Infrasys, our dealer in Philippines, will be delivering presentation on the series of seminars "Foundation Solutions for Tomorrow 2016" organized by Mer Lion Metals Pte Ltd.
Upcoming Seminars will be held in:
Tacloban 21st June
Bicol 28th June
Mer Lion Metals is a producer of steel sheet piles and also provider of steel foundation solutions on projects in the Asian region. Their MMU and MMZ sheet pile profiles has been implemented to the GEO5 software (released in Spring Update of 2016 Edition).
See photos from previous seminars bellow.
14/06/2016
itech, our partner in France, will promote the newest Edition of geotechnical engineering software GEO5 2016 at Interoute conference in Paris (June 14 - 16, 2016).
08/06/2016
We will attend “67. Berg- und Hüttenmännische Tag” conference organized by TU Bergakademie Freiberg (8-10 June 2016).
09/06/2016
Our dealer, Geoportal d.o.o., is attending the Annual Meeting of Croatian Chamber of Civil Engineers (11. Dani ovlaštenih inženjera građevinarstva) in Opatija, Croatia on 11th of June. Stop by their booth and get information about latest Edition of GEO5 geotechnical software.
26/05/2016
Geogrup, our partner in Turkey, will be participating in the “Road 2 Tunnel Fair” in Ankara (May 26 – 28).
27/05/2016
ICC Chile will be delivering a training course on deep and shallow foundation design in Santiago this May 27th, 28th and 29th. Visit their pages for more information about the event.
20/04/2016
Infrasys presented GEO5 Geotechnical Analysis solutions at the Mer Lion Metals "Foundation Solutions for Tomorrow 2016" Seminar held at the Diamond Hotel, Manila, Philippines on Wednesday 20th April, 2016.
29/04/2016
ICC, our dealer in Colombia, will be delivering a training course on deep and shallow foundation design in Bogotá this April 29th, 30th and May 01st.
15/03/2016
Start Consult EOOD, our partner in Germany, will be attending VDEI-Kolloquium Geotechnik in Neustadt an der Weinstraße (15th March).
15/03/2016
infraSys, our dealer in Philippines, is organizing one day Seminar|Workshop on Foundation Design & Analysis using Fine Software’s GEO5 software suite and Bentley’s STAAD Foundation Advanced (Tuesday 15th March, 2016).
08/03/2016
Start Consult EOOD, our partner in Germany, will present GEO5 software at "Erd- und Grundbautagung 2016" in Worms, Germany (8 - 9 March 2016).
02/02/2016
SCIA nv performs the online webinars about GEO5 geotechnical software (2/2/2016). The presentation provides with clear overview on the new Edition 2016 and its new features. Take a look at Dutch and French version of the recorded webinars.
18/01/2016
The short course on the application of GEO5 geotechnical software will be conducted by Mr. Gouw (GTL Geotech Services) in Jakarta, Indonesia (18-20 January, 2016).
Main topics are:
- Determination on pile capacities (lateral, vertical, and group)
- Slope stability analysis and slope stabilization
- Mechanically stabilized earth
The course also covers the relevant theoretical background, and determination of required geotechnical parameters.
09/11/2015
Nanjing Kulun Software Technology Co. Ltd., our Chinese partner, was invited to attend Jiangsu province foundation union annual conference. The conference was held in Dingshan International Hotel in Yixing city and was co-sponsored by foundation professional Jiangsu Province survey and design association and Jiangsu Province survey technology information station.
15/11/2015
The Argentinian Geotechnical Engineering Society (SAIG) is pleased to announce that it will be the host of the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE), to be held in Buenos Aires (Argentina) from 16th to 18th November 2015 .
This conference will bring together international experts, researchers, academics, professionals and geoengineering companies in a unique opportunity to exchange ideas and discuss current and future practices in the areas of soil mechanics and rock mechanics.
Fine will be presenting the new version of GEO5 – in the booth number 001.
09/11/2015
Fine company supported the 43nd Foundation Engineering Conference in Brno, Czech Republic (9-10 November 2015) as the main sponsor. Also the winners of the eight edition of the Student Competition, which is organized together with Mott MacDonald company, were revealed.
The winner of the competition in the category of "diploma thesis" is Ing. Zdeněk Šiška (ČVUT - Praha) for his work "Parametric study of slope stability based on monitoring results".
The winner of the competition in the category of "bachelor's thesis" is Bc. Martin Baláž (ČVUT - Praha) for his work "Numerical calculations minted metro station Nádraží Veleslavín".
01/11/2015
GEO5 2016 features new program Anti-Slide Pile and many other major improvements:
Take a look at more information about GEO5 2016 or simply try our Demo Version for yourself.
Fine Maintenance subscribers can download and install the new Edition for free. Other customers can calculate the price of their Single Upgrade in our Shop – just sign into your account or contact us.
25/09/2015
GEO5 2016 comes with many important improvements and changes.
New system of releases
Fine Software changes the method of new releases, as of November 1st 2015. The reason for the revision is to provide better services to our customers and mainly faster availability of new program
features.
New program Anti-Slide Pile
New features brought by GEO5 2016
- Program Controls and Appearance
- 3D Visualization and Settings
- Improvements in the FEM program
- Field Tests Support
Further information in the GEO5 2016
12/10/2015
HungaroCAD Informatikai Kft., our dealer in Hungary, will promote GEO5 software on the "Geotechnika 2015. Konferencia" in Ráckeve, Hungary (12-14 October 2015).
02/11/2015
BHL Projekt d.o.o., our distributor in Serbia, will present GEO5 software at "International Symposium of Geotechnical Engineers" in Vršac, Serbia (2-6 November 2015). This event is organized by the Union of Engineers and Technicians of Serbia and Serbian Society for Soil Mechanics and Geotechnical Engineering.
09/11/2015
Fine will introduce a new version of the GEO5 software on “43rd Conference Foundations Brno 2015”, which is organized by the Czech Geotechnical Society (9-10 November 2015).
07/07/2015
MMGEO, our exclusive dealer in Poland, will introduce GEO5 software suite at the “17th National Conference on Soil Mechanics and Geotechnical Engineering” organized by the Polish committee of Geotechnics. The exhibition will be held in Łódź, Poland (7-10 July 2015).
24/06/2015
Mr. Gouw, our dealer in Indonesia, is going to conduct a short geotechnical course during 24-26 June 2015. The course shall cover slope stability analysis, lateral earth pressures and excavation design using the GEO5 software.
The course will be conducted by refreshing the basic relevant geotechnical theory, followed by the in depth discussion of geotechnical engineering knowledge and how to implement the knowledge into practice. For further information, please take a look at GTL Geotech Service website.
12/05/2015
Incotec and Fine companies are excited to invite you to attend the “2nd International Conference on Deep Foundations”. The CEO of Fine, Jiri Laurin, has also accepted the invitation to participate as a speaker on the conference, which will be held in Santa Cruz, Bolivia on 12 - 15 May 2015.
27/04/2015
The Tunisian Association of Soil Mechanics (ATMS) will organize the 16th African Regional Conference on Soil Mechanics and Geotechnical Engineering. The conference will be held from April 27 to 30, 2015 in Hammamet, Tunisia.
Our dealer, iTech (France), will be presenting the GEO5 software during the conference. Free GEO5 Demo (in French or English language) will be available on the booth. Feel free to take a look around.
17/04/2015
Ingeservicios S.A.C., our dealer in Peru, will attend the "3rd International Conference on Geotechnical and Foundation Engineering" in Lima (April 17-18). Feel free to visit them at the booth 002.
16/02/2015
Nemetschek Scia, our local dealer, is organizing the online webinar about GEO5 software.
The presentation (in English) will last approximately one hour and will be held on February 16 at 10h30.
Register to the online session to get a clear overview of GEO5 geotechnical software. During this webinar all the programs will be introduced in an overview and the Slope Stability, Cantilever Wall and FEM programs will be shown more in detail.
05/01/2015
Geotechnical Department of Technical University of Iasi, toghether with Proexrom, organized the seminar about GEO5 software. The presentation was held in Iasi, Romania in front of teachers, students and geotechnical engineers. During the presentation, answers were given regarding the way the sofware works and its usability.
05/12/2014
Bulgarian Soil Mechanics and Geotechnical Engineering Society together with Start Consult Ltd. organize the seminar about GEO5 software. The presentation will be held in Sofia, Bulgaria on 5th December 2015.
26/11/2014
Oitec Ltda., our dealer in Chile, attended “VIII Chilean Congress in Geotechnical Engineering” to present their engineering services and also GEO5 geotechnical software suite. The exhibition was held in Santiago, Chile (26 - 28 November 2014).
27/11/2014
REI Software Co., Ltd., our dealer in Thailand, will be attending the Thailand Engineering Expo 2014 in Bitec Bangna (27-30 November).
Visit Mr. Partha Pradhan to get information about our programs and news in v19!
16/10/2014
GEOgrup Insaat A.S, our dealer in Turkey, introduced GEO5 geotechnical software suite at “15th National Conference on Soil Mechanics and Foundation Engineering” organized by the Turkish committee of ISSMGE. The exhibition was held in Ankara, Turkey (16-17 October 2014).
03/11/2014
Fine company supported the 42nd Foundation Engineering Conference in Brno, Czech Republic (3-5 November 2014) as the main sponsor. Also the winners of the eight edition of the Student Competition, which is organized together with Mott MacDonald company, were revealed.
The winner of the competition in the category of "diploma thesis" is Ing. Václav Pátek (ČVUT - Praha) for his work "Analysis of THM processes for in-situ experiment Mock-Up Josef".
The winner of the competition in the category of "bachelor's thesis" is Bc. Tomáš Philipp (ČVUT - Praha) for his work "Foundation of office building in Prague – Karlin".
13/10/2014
HungaroCAD Informatikai Kft., our dealer in Hungary, will promote GEO5 software at "Geotechnika 2014 Konferencia" in Ráckeve, Hungary (13-15 October 2014).
15/10/2014
From 15 to 18 of October 2014, Fine and Ingeosolum Colombia have had the pleasure to being part of the XIV CONGRESO COLOMBIANO DE GEOTECNIA, presenting to the community our software GEO5 to solve geotechnical problems .
In a stand that mixed the educational and professional field, GEO5 presented its advantages and solutions for civil and geotechnical engineering.
15/10/2014
Start Consult, our dealer in Bulgaria, will exhibit at “International conference for development and innovation in Geotechnics and tunneling - GEO PROJECTS 2014" in Sofia (October 15 - 17, 2014). Join Start Consult to see our latest software releases and features in GEO5 software.
15/09/2014
Fine was pleased to gave a three-day training in National Grid Corporation of the Philippines in Quezon City, Philippines. The workshop consisted of a balanced mixture of lectures and hands-on computer analyses in order to offer an introduction to the modelling of geotechnical problems that are encountered in day-to-day engineering practice. The computer exercises were performed with the latest version of GEO5 software.
07/09/2014
Wu Wen Yuan, Technical Director from Pangolin presented GEO5 software to the major Chinese design institutes (Railway Siyuan Survey and Design Institute, China Power Engineering Consulting Group South Electric Power Design Institute, Changjiang Water Resources Commission Survey and Design Institute, Institute of Hubei Electric Power Survey and Design Institute) during August 2014.
28/08/2014
GEOgrup Insaat A.S, our exclusive reseller in Turkey, will be attending “Tunneling Expo Turkey” to present GEO5 geotechnical software suite. The exhibition will be held in Istanbul, Turkey (28-31 August 2014). More than 100 national/international companies will present their products and services at this exhibition.
08/07/2014
itech, our exclusive reseller in France, will exhibit at "Journees Nationales de Geotechnique et de Geologie de L´Ingenieur" conference in Beauvais (July 8 - 10, 2014). Join itech to find out more about latest news and features in GEO5 software.
24/06/2014
Start Consult Ltd., was invited by Bulgarian National Organizing Committee to attend the “6th International Geomechanics Conference (IGC'2014)” on June 24-28, 2014 at Bulgaria (Varna). GEO5 Geotechnical software was succesfully demonstrated by our partner.
04/06/2014
CSP Fea s.c., our dealer in Italy, will exhibit at the “National Congress of Geotechnics” hold by AGI Associazione Geotecnica Italiana. The conference will be held in Baveno, Italy (4-6th of June).
19/04/2014
Ganzhou Pangolin Technology Co., Ltd., was invited by Engineering Investigation Branch of Architectural Society of China (ASC) to attend the “6th National Slope Engineering Technology Conference (第六届全国边坡工程技术大会)”on April 19-21, 2014 at China (Beijing). Technical Director Wu Wen-Yuan introduced the development history of GEO5 software, new settings of Chinese standards implemented in software and also its wide applications in the field of slope engineering.
24/04/2014
GEOgrup Insaat A.S, our exclusive reseller in Turkey, will be attending the “2nd Soil Mechanics and Foundation Engineering Symposium” to present our geotechnical software suite GEO5. The conference will be held in Antalya, Turkey (24-25 April 2014).
14/03/2014
GEO5 geotechnical software, developed by Fine s.r.o., recently won the “Top Builder 2014” prize in Poland. Builder, the well-known Polish building magazine, is each year the organizer of the award. The winners were announced during "BUDMA 2014", the international construction fair.
Monika Mitew-Czajewska (MMGEO), our exclusive reseller in Poland, received the prize “Top Builder 2014” for GEO5 software.
11/03/2014
GEO5 will be presented at "International Construction and Architecture Fair Budma 2014" in Poznań (11 - 14 March, 2014) by MMGEO, our exclusive distributor in Poland.
03/03/2014
The short course on the application of GEO5 geotechnical software was conducted by Mr. Gouw (GTL Geotech Services) in Jakarta, Indonesia (3-5 March, 2014).
05/12/2013
19/11/2013
Fine introduced GEO5 geotechnical software at the 2th International Congress of Deep Foundations in Mexico city (November 14-15).
During the International Congress "II Simposio internacional de cimentaciones profundas" in Mexico City, Fine introduced to the Mexican market his software GEO5 to solve geotechnical problems, in a stand where interest, exchange of experiences and projects generated a good environment where engineers, teachers, students, private and public companies show particularly interested in our solution. We like to share with our users and customers this experience, and we are looking forward for our next meeting.
14/11/2013
Fine introduced GEO5 geotechnical software at the 2nd International Congress of Deep Foundations in Mexico city (November 14-15).
During the International Congress "II Simposio internacional de cimentaciones profundas" in Mexico City, Fine introduced to the Mexican market his software GEO5 to solve geotechnical problems, in a stand where interest, exchange of experiences and projects generated a good environment where engineers, teachers, students, private and public companies show particularly interested in our solution. We like to share with our users and customers this experience, and we are looking forward for our next meeting.
15/10/2013
HungaroCAD Informatikai Kft., our reseller in Hungary, promoted GEO5 software on the "Geotechnika 2013. Konferencia" in Ráckeve, Hungary (15-16 October 2013).
14/10/2013
We are pleased to announce the release of GEO5 version 17, which brings LRFD 2012 standards, Spread footing uplift check, Bustamante methods in Micropile and many other features and enhancements within GEO5 programs.
We are also releasing two new parts of Engineering manuals, where first part is focused on Pile analysis and second on Finite element analysis.
You can read the full list of improvements.
Fine Maintenance subscribers can take advantage of immediate upgrade to GEO5 version 17.
Other GEO5 users can get the latest version by purchasing Single Upgrade.
Single upgrade from v16 to v17 = 10% of price of all license.
Price of Single Upgrade from older versions can be easily obtained in our e-shop – sign in to your account.
Download GEO5 demo v17 – Try our software without any analysis limitations!
Follow us in social media - By becoming a fan on Facebook or subscribing to our videos on Youtube, you can make sure that you hear the latest things first.
17/09/2013
The second part of GEO5 Engineering manuals, focused on the analysis of pile foundations, has been released.
The objective of second part is to explain the practical use of programs for the analysis of pile foundations in GEO5. GEO 5 software contains three pile foundation analysis programs – Piles, Pile CPT and Pile Group. The Engineering manuals contains closer explanation of which of the programs is to be used under particular conditions.
The great advantage of GEO5 software is the possibility to try more variants and analysis methods, find the most likely behaviour of the pile foundation and subsequently determine the total bearing capacity or settlement of a single pile or a pile group.
Explore all possibilities of GEO5 - download Engineering Manual - Part 2 for free.
10/12/2012
New version of GEO5 has been released with a new system for administration of analysis settings, Pile Group program and many other improvements.
We are pleased to announce the release of GEO5 version 15. The most important change in version 15 is the new system for input of analysis settings, which makes the work with programs very comfortable.
We also release the long-awaited program Pile Group in version 15. There are also the further modifications and improvements within GEO5 programs.
Try new features in the demoversion (v15).
Maintenance subscribers can download GEO5 version 15 for free. The other GEO5 users can get the latest version by purchasing Single Upgrade.
10/12/2012
The new program Pile Group has been released along with GEO5 version 15. Program is used for analysis of group of piles (raft foundation, pile cap).
We would like to proudly present the new program - Pile Group. Program is used for analysis of group of piles (raft foundation, pile cap) using both spring method (FEM) and analytical approaches.
You can find futher information about Pile Group or download demoversion (v15) to try it for yourself.
Or you can check another improvements in GEO5 version 15.
12/11/2012
Fine company introduced its software products on the "Foundation Engineering Conference" in Brno, Czech Republic (11-12 November 2012). Also the winners of the sixth edition of the Student Competition, which is organized together with Mott MacDonald company, were revealed.
The winner of the competition in the category of "diploma thesis" is Ing. Zdeněk Žižka (ČVUT - Praha) for his work "Face stability modelling of shield tunnelling".
The winner of the competition in the category of "bachelor's thesis" is Bc. Alice Hastíková (Technical University Ostrava) for her work "Model Analysis of the Interaction of the Geological Environment with a Circular Reinforcement of Underground Works, Depending on the Reinforcement Stiffness".
13/06/2012
New GEO5 version 14 has been released. It brings many improvements like Axisymetry in FEM program, Chinese and Russian Standards (SNIP,GB), Graphical printouts with table of soils.
Further info about improvements and new tools in GEO5 version 14. Try new features in the demoversion .
Maintenance subscribers can install GEO5 version 14.
The other GEO5 users can get the latest version by purchasing Single Upgrade.
03/11/2011
The new program MSE Wall (GEO5 v13) has been released. It is used to verify mechanically stabilized earth walls.
You can find futher information about MSE Wall or download demoversion to try it for yourself.
Or you can check another improvements in GEO5 version 13.
03/11/2011
New GEO5 version 13 (English) has been released. It brings many improvements like modelling of water as a result of water flow analyses (FEM), seismic design (EC8), improved output reports etc.
Also the new program MSE Wall for design of mechanically stabilized earth walls has been released along with GEO5 version 13.
Further info about improvements and new tools in GEO5 version 13.
Existing users may check their license and install latest software.
Other users may try demoversion for themselves.
15/11/2011
The winners of the fifth edition of the Student Competition were revealed on the "Foundation Engineering Conference" in Brno, Czech Republic (8 - 9 November 2011).
The winner of the competition in the category of "diploma thesis" is Ing. Jan Vrbata (ČVUT - Praha) for his work "Back analysis of measured displacement of primary lining of Brusnice tunnel".
The winner of the competition in the category of "bachelor's thesis" is Bc. Jiří Šach (ČVUT - Praha) for his work "Design of the Primary Lining of a Double-Track Metro Tunnel".
Competition is organized together with Mott MacDonald company.
03/10/2011
Geotechnical software GEO5 was presented at "International conference on Geotechnics for sustainable development" in Hanoi, Vietnam (October 2011).
We met many professionals and researchers from both academic institutes and engineering companies especially from Vietnam. In addition, we were glad to receive valuable and positive feedback from the attendees on using GEO5 in their engineering projects.
07/03/2011
New RTF exports for MS Word, program Plate, new methods in program Slope Stability and analysis of consolidation in program Settlement. Further information about GEO5 version 12.
09/12/2010
JSC Reconstruktsiya, exclusive dealer in Russia, has been going through the application process for the Russian GOST-R Certificate of Conformity.
The application process has now been successfully concluded and we are happy to announce that on 3rd of December 2010 the Russian government certified that all GEO5 products are conform to the Russian State Standard.
Download and view the full certificate.
For more information on this please contact our Russian distributor.
12/08/2010
Version 11 brings the new program Beam, FEM-Water Flow, new methods in program Piles, National Annexes to EN 1997 and another improvements. Further information about GEO5 version 11.
10/11/2010
Fine company supported the 38th Foundation Engineering Conference in Brno, Czech Republic (8-10 November 2010) as the main sponsor. Also the winners of the Student Competition, which is organized together with Mott MacDonald company, were revealed.
The winner of the competition in the category of "diploma thesis" is Ing. Jaroslav Beňo (ČVUT - Praha) for his work "3D modeling of Blanka tunnel excavation".
The winner of the competition in the category of "bachelor's thesis" is Bc. Alice Wetterová (VUT - Brno) for her work "Královopolské Tunnels Brno – securing of the foundation pit".
17/02/2010
GEO5 Redi Rock Wall program with option "Analyses according to LRFD (Load and Resistance Factor Design)" has been released.
26/11/2009
New release - GEO5 users with activated program Fine Maintenance can download and install GEO5 version 10. Read the release notes.
17/02/2010
Geotechnical software GEO5 will be presented at GeoFlorida 2010 (February 20-24, 2010) by our exclusive North American distributor, gINT Software Inc.
28/05/2009
GEO5 users with activated program Fine Maintenance can download and install upgrade 5.9, which contains number of new features and improvements.
21/08/2008
Download the Croatian version of GEO5 demo. GEO5 Demo in other languages is also available.
03/07/2008
Geotechnical software package GEO5 has been localized to Russian language. Download the Russian version of GEO5 demo. GEO5 Demo is also available in other languages.
11/03/2008
New GEO5 program Redi Rock Wall for retaining wall design has been developed for Redi Rock Inc., USA.